第71章

It is, therefore, to this extent, an original conception. Having made an outline of the subject, I found that, before I could proceed with it successfully, a knowledge of anatomy was indispensable to enable me accurately to delineate the muscles of the figures. My brother Peter came to my assistance at this juncture, and kindly purchased for me Flaxman's 'Anatomical studies,' - a work altogether beyond my means at the time, for it cost twenty-four shillings. This book I looked upon as a great treasure, and I studied it laboriously, rising at three o'clock in the morning to draw after it, and occasionally getting my brother Peter to stand for me as a model at that untimely hour. Although Igradually improved myself by this practice, it was some time before I felt sufficient confidence to go on with my picture. I also felt hampered by my want of knowledge of perspective, which Iendeavoured to remedy by carefully studying Brook Taylor's 'Principles;' and shortly after I resumed my painting. While engaged in the study of perspective at home, I used to apply for and obtain leave to work at the heavier kinds of smith work at the foundry, and for this reason - the time required for heating the heaviest iron work is so much longer than that required for heating the lighter, that it enabled me to secure a number of spare minutes in the course of the day, which I carefully employed in ****** diagrams in perspective upon the sheet iron casing in front of the hearth at which I worked."Thus assiduously working and studying, James Sharples steadily advanced in his knowledge of the principles of art, and acquired greater facility in its practice. Some eighteen months after the expiry of his apprenticeship he painted a portrait of his father, which attracted considerable notice in the town; as also did the picture of "The Forge," which he finished soon after. His success in portrait-painting obtained for him a commission from the foreman of the shop to paint a family group, and Sharples executed it so well that the foreman not only paid him the agreed price of eighteen pounds, but thirty shillings to boot. While engaged on this group he ceased to work at the foundry, and he had thoughts of giving up his trade altogether and devoting himself exclusively to painting. He proceeded to paint several pictures, amongst others a head of Christ, an original conception, life-size, and a view of Bury; but not obtaining sufficient employment at portraits to occupy his time, or give him the prospect of a steady income, he had the good sense to resume his leather apron, and go on working at his honest trade of a blacksmith; employing his leisure hours in engraving his picture of "The Forge," since published. He was induced to commence the engraving by the following circumstance. AManchester picture-dealer, to whom he showed the painting, let drop the observation, that in the hands of a skilful engraver it would make a very good print. Sharples immediately conceived the idea of engraving it himself, though altogether ignorant of the art. The difficulties which he encountered and successfully overcame in carrying out his project are thus described by himself:-"I had seen an advertisement of a Sheffield steel-plate maker, giving a list of the prices at which he supplied plates of various sizes, and, fixing upon one of suitable dimensions, I remitted the amount, together with a small additional sum for which I requested him to send me a few engraving tools. I could not specify the articles wanted, for I did not then know anything about the process of engraving. However, there duly arrived with the plate three or four gravers and an etching needle; the latter I spoiled before Iknew its use. While working at the plate, the Amalgamated Society of Engineers offered a premium for the best design for an emblematical picture, for which I determined to compete, and I was so fortunate as to win the prize. Shortly after this I removed to Blackburn, where I obtained employment at Messrs. Yates', engineers, as an engine-smith; and continued to employ my leisure time in drawing, painting, and engraving, as before. With the engraving I made but very slow progress, owing to the difficulties I experienced from not possessing proper tools. I then determined to try to make some that would suit my purpose, and after several failures I succeeded in ****** many that I have used in the course of my engraving. I was also greatly at a loss for want of a proper magnifying glass, and part of the plate was executed with no other assistance of this sort than what my father's spectacles afforded, though I afterwards succeeded in obtaining a proper magnifier, which was of the utmost use to me. An incident occurred while Iwas engraving the plate, which had almost caused me to abandon it altogether. It sometimes happened that I was obliged to lay it aside for a considerable time, when other work pressed; and in order to guard it against rust, I was accustomed to rub over the graven parts with oil. But on examining the plate after one of such intervals, I found that the oil had become a dark sticky substance extremely difficult to get out. I tried to pick it out with a needle, but found that it would almost take as much time as to engrave the parts afresh. I was in great despair at this, but at length hit upon the expedient of boiling it in water containing soda, and afterwards rubbing the engraved parts with a tooth-brush;and to my delight found the plan succeeded perfectly. My greatest difficulties now over, patience and perseverance were all that were needed to bring my labours to a successful issue. I had neither advice nor assistance from any one in finishing the plate. If, therefore, the work possess any merit, I can claim it as my own;and if in its accomplishment I have contributed to show what can be done by persevering industry and determination, it is all the honour I wish to lay claim to."It would be beside our purpose to enter upon any criticism of "The Forge" as an engraving; its merits having been already fully recognised by the art journals. The execution of the work occupied Sharples's leisure evening hours during a period of five years; and it was only when he took the plate to the printer that he for the first time saw an engraved plate produced by any other man. To this unvarnished picture of industry and genius, we add one other trait, and it is a domestic one. "I have been married seven years," says he, "and during that time my greatest pleasure, after I have finished my daily labour at the foundry, has been to resume my pencil or graver, frequently until a late hour of the evening, my wife meanwhile sitting by my side and reading to me from some interesting book," - a ****** but beautiful testimony to the thorough common sense as well as the genuine right-heartedness of this most interesting and deserving workman.